Mudhugger Spare Parts

All spare parts for your Mudhugger needs. 

EVO Adapter Pack - DVO

• Designed around the DVO Onyx SC fork to allow fitting the Mudhugger EVO via the 3 bolt holes in the back of the fork.
• The adapter is also compatible with the 2024 Diamond 36 D1 SL which use the same chassis as the Onyx SC.
• Not compatible with the new 2024 Onyx 38mm stanchion fork.
• Not compatible with the old 35mm stanchion Diamond forks.
• Only compatible with Mudhugger Bolt-on's purchased from the Mudhugger website.

EVO Adapter Pack - 2021 LYRIK

• MINIMUM FORK OFFSET 44MM.
• Please note NOT COMPATIBLE WITH 38MM OFFSET or PSYLO GOLD or SILVER RC.

Kit includes -

1 x LYRIK, PSYLO, PIKE adapter Bracket

1 x M3 18mm bolts

2 x M3 16mm bolts

3 x M3 9mm OD washers

2 x self tapping screws

Fitting Instructions

See below how to fit to your forks.

EVO Adapter Pack - OHLINS

• COMPATIBLE WITH 2019 ONWARDS RXF 36, 38 AND DH FORKS.
• MINIMUM FORK OFFSET - 44MM

Kit includes -

1 x OHLINS adapter Bracket

3 x M4 bolts

1 x Hex key

EVO Adapter Pack - 2021 ZEB / DOMAIN BOLT-ON

• MINIMUM FORK OFFSET 44MM.
• NOT COMPATIBLE WITH 38MM OFFSET.

Kit includes -

1 x ZEB adapter Bracket

3 x M3 16mm bolts

3 x M3 9mm OD washers

Gravel hugger O-ring kit

Replacement kit for the front Gravelhugger o-rings and helitape.

2 x 70mm and 4 x 50mm O-rings.

2 x 100x20mm helitape

Rear Gravel Hugger Quick Fit Strap Pack

• 4x Hook and Loop straps as a QR means to attach the Rear GravelHugger to your Gravel Bike.
• Reusable straps - remove and fit your Rear GravelHugger in seconds, no tools required or zipties to replace or throw away
• Length of strap is 210mm including D buckle. Cut to length once fitted to your bike
• Maximum seat stay circumference - 100mm
• Minimum seat stay circumference - 50mm
• If unsure please measure the circumference of your seat stays where the Rear GravelHugger will sit.

BB extender for MK2 Large and Medium Rear Mudhugger

• Individual BB extender for the MK2 Rear Mudhuggers.
• Simple click in place extender to help protect the BB area of you MTB, only compatible with the MK2 Rear Mudhuggers.
• Designed, made and packed in the UK from 100% recycled plastic.
• Trim the length and width to suit your needs.
• Length of extension 230mm, width 85mm, when fitted.

Rubber strips for MK2 Rear Mudhuggers

Replacement self adhesive rubber strips for the MK2 Rear Mudhuggers.

• Pack comes with 5 pairs of approx 4mm wide x 140mm long rubber strips.
• Please take the time to clean out any old adhesive and mud etc from the slots before fitting the reaplacement rubber strips.

Quick Fit straps for MK2 Rear Mudhugger 4 x 20mm

• Pack of 4 x 20mm wide silicon backed Quick Fit straps for use with the new MK2 Rear Mudhuggers.
• Only compatible with the MK2 REAR Mudhuggers, not any of the older rear Hugger versions.