We can replace your steerer tube using the High-Quality 7050-grade Aluminium ND Tuned tubes.
You may need to replace your steerer tube if;
- You require a longer tube to fit a different bike, or you've cut it too short.
- You've discovered a creak (Please contact us if your fork is covered by warranty).
Creaking steerer tubes or incorrectly repaired steerer tubes can become dangerous, so it's vital you get the work done by a professional, and we're here to help.
Prices
- Steerer Tube only: £100
- Steerer Tube + fitting at the same time as a service: £130 (see service prices)
- Steerer Tube + fitting to complete fork, without a service: £170
- Steerer Tube + fitting to supplied CSU: £130
- For replacement on DH lower crown (removed from fork): £130
The Process
-
1.
First, we strip the fork, pressing out the steerer tube and stanchions.
-
2
We then measure the crown tolerance using a Mitutoyo micrometer & bore gauge. Accurate to 1 micron (0.001mm)
-
3.
If we find the crown to be out of tolerance, we will go no further until we discuss your options.
-
4.
If the crown is within tolerance, we will press the new steerer and stanchions back in with a strong bonding agent. This secures the joint. It also seals the joint, preventing contamination. Any corrosion may begin the process of a creaking CSU.
